Heat Exchangers for Dehumidification Systems

Application requirements

A refrigeration dehumidifier removes moisture at the evaporator and may reheat air through the condenser. Selection must consider the air condition through both stages. A dry-coil duty does not fully describe wet-coil operation, condensate handling or operation at lower room temperatures.

Define the thermal duty

Provide the normal design point and the difficult operating cases, including the ambient range and load variation. State how the duty was calculated and which conditions are fixed. This allows the component enquiry to reflect the intended system rather than a single nominal rating.

Information for selection

• Entering air temperature and humidity
• Target moisture removal and leaving-air condition
• Airflow and fan-pressure limit
• Condensate drainage and refrigerant circuit

Relevant product enquiries

Installation & operating considerations

Identify air or fluid distribution, orientation, access for cleaning and inspection, and the permitted pressure drop. Specify the environment, including coastal or industrial exposure where relevant. Confirm connections and tolerances against the equipment drawing.

Product qualification

Refrigerant suitability, operating limits and test conditions must be confirmed for the selected component. References to an application do not certify every catalogue product for it.

Agree a sample and validation plan before series supply. Separate the component’s acceptance criteria from system-level performance and regulatory requirements.

Buyer questions

Related products & resources